Installation instructions cont’d, Coulter arm installation instructions, Using a 16” coulter blade – Yetter 2940-010 Combo User Manual
Page 7
7
INSTALLATION INSTRUCTIONS
CONT’D
STEP 3:
Install coulter blade using a quantity of 4-
1/2”x1 ¼” carriage bolts.
Make sure shoulder on carriage bolt shoulders rest inside of square
hole on the hub. The blade MUST be on the hub before mounting
the coulter arm. IF USING SETTING #2 ON CHART AT THE
BOTTOM OF THE PAGE FOR DEPTH, LEAVE THE BLADE
LOOSE ON THE HUB IN ORDER TO INSTALL COULTER ARM
MOUNTING BOLT CLOSEST TO THE BLADE.
COULTER ARM
INSTALLATION INSTRUCTIONS
USING A 16” COULTER BLADE
15” PLANTER BLADES
15” PLANTER BLADES
JD 7000 AND KINZE PLANTERS JD 1700, 7200, & 7300 PLANTERS
ALL WHITE 6000 PLANTERS
PRO AND PLUS SERIES
BOLT POSITION #
BOLT POSITION #
1) 1-
1/2” ABOVE
1) 1” ABOVE
2) 1” ABOVE
2) 5/8” ABOVE
3) ½” ABOVE
3) EVEN
4) ½” BELOW
4) 7/8” BELOW
NOTE: THIS IS A REFERENCE GUIDE TABLE. ALL MEASUREMENTS WERE TAKEN
WITH ROW UNIT AND PLANTER FRAME LEVEL/PARALLEL TO THE SOIL.