Yetter 2960-020 Unit Mounted Conservation Coulter for 800/900/950/955/1200 Cyclo Planters - Manual (Page 4)

4
TABLE OF CONTENTS
Cover Page…………………………………………………………………………pg. 1
Foreword……………………………………………………………………………pg. 2
Safety Symbols
and meanings………………………………………………………………………pg. 2-3
Table of Contents.…………………………………………………………………pg. 4
Torque Specifications..……………………………………………………………pg. 4
Assembly Instructions..……………………………………………………………pg. 5
Operation……………………………………………………………………………pg. 6
Maintenance..………………………………………………………………………pg. 6,9
Parts Identification…………………………………………………………………pg. 7-8
Trouble Shooting…..………………………………………………………………pg. 10-11
BOLT TORQUE
READ THESE INSTRUCTIONS FIRST:
1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts
are staying tight.
4. The chart below is a guide for proper torque. Use is unless a specified torque is called out
elsewhere in the manual.
5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the handle
or bar used.
6. Use a torque wrench whenever possible.
The following table shows torque in foot pounds.