Yetter 2961-012 Cut and Feed Coulter/Fertilizer - Manual (Page 12)

12
ASSEMBLY INSTRUCTIONS
2961 – CUT AND FEED™
STEP 7.
Apply thread tape to the 2515-311 Pipe Nipple. Attach the pipe nipple to the 2995-212 Injector
Rod. Fully thread the 2520-356 ½” jam nut onto the injector rod.
STEP 8.
Attach the 2959-105 Injector Spring assembly to the Injector Rod, secure the spring to the rod
with the ½” jam nut.