Yetter 2961-010-015 Cut and Move Coulter/Residue Manager Opener - Manual (Page 8)

8
ASSEMBLY INSTRUCTIONS
2961 – CUT AND MOVE
STEP 8. Install a ½” x 3-1/2” bolt into the lower rear hole of the 2961-200 coulter bracket and secure with
lock nut. DO NOT OVER-TIGHTEN THE BOLT!
STEP 9. The universal model that fits on JD 7200/1700 series planters can be mounted two ways (See
Figure 1). The front set of holes is to mount these models on planter units with light duty or heavy duty cast
lower parallel arms. The rear set of holes is for planter units with heavy-duty welded lower parallel arms.
MOUNTING ARRANGEMENTS FOR JOHN DEERE 7200/1700 SERIES
FIGURE 1
FIGURE 2