Installation instructions – Yetter 2967-064 Residue Manager User Manual

Page 8

Text mode
Original mode

Advertising

INSTALLATION INSTRUCTIONS

STEP 3.

Choose the hole in which to attach the R.M. wheel assemblies. Attach the R.M. wheel/hub

assemblies to the combo arm using 5/8” whizlock hex nuts. Adjust the bearing shield to top dead center,
rotated slightly forward. Torque to 150 ft. lbs.

Advertising

This manual is related to the following products:

2967-063 Residue Manager 2967-004 Residue Manager 2967-001 Residue Manager