Yetter 2967-008 Titan for CNH planters - Manual (Page 10)

10
INSTALLATION INSTRUCTIONS
STEP 4. Choose the mounting hole in which to attach the R.M. wheels. Attach the R.M. wheel/hub
assemblies to the 2966-252 Combo Arm using 5/8” lock washers and hex nuts. Adjust the bearing shield to
top dead center, rotate slightly forward. Torque to 150 ft./lbs.
MOUNTING CONFIGURATIONS FOR RESIDUE WHEELS
2967-404 – 13” TAPER TOOTH SPOKE WHEEL
2967-596 – 3/8” HEAVY DUTY SPOKE WHEEL
2967-602 – 13” SHARKTOOTH WHEEL
2967-388 – 10” TAPER TOOTH SPOKE WHEEL