Yetter 2967 Series Screw Adjust Residue Manager - Manual (Page 8)

8
INSTALLATION INSTRUCTIONS
STEP 1. Fill the wheel assembly with #2 multi-purpose grease. Approximately 30 pumps
with a lever style grease gun.
STEP 2. Choose the mounting hole in which to attach the R.M. wheels. Attach the R.M.
wheels/hub/shield assemblies to the 2966-206-stem adjustment bracket using 5/8” D-
bolts, lock washers and hex nuts. Adjust the bearing shield to top dead center, rotate
slightly forward. Torque to 150 ft./lbs.