Yetter 2967-082 Residue Managers - Manual (Page 9)

9
ASSEMBLY
2965 Trashmaster
1. When assembling the blade, bearing assembly and hub cap, be sure to align the grease fitting
hole with the hole in the blade, with groove in hub cap to assure proper greasing of blade
assembly.
2. Install Trashmaster as shown in parts identification view of the appropriate model. Always
stagger the blades so that half of the rows have the left blade leading and half have the right
blade leading.
3. Fill hub and bearing assembly with general-purpose grease.
2967 Residue Manager
1. Build half of the row cleaner wheel assemblies as left-hand wheel assemblies and half as
right-hand wheel assemblies. This is determined by which side of the wheel support and in
which hole the wheel assembly is installed.
2. When assembling the spoke wheel, bearing assembly and hub cap, be sure to align the
grease fitting hole with the hole in the spoke wheel with groove in hub cap to assure proper
greasing of wheel and hub assembly.
3. Install Residue Manager as shown in parts identification view of the appropriate model. Be
sure to install the 3/4” spacers and bearing shields when assembling the spoke wheel and
bearing assembly. Stagger spoke wheel so that half of the rows have the left wheel leading
and half of the rows have the right wheel leading.
4. Fill the hub and bearing assembly with general-purpose grease.