Yetter 2967-030 TITAN Residue Manager - Manual (Page 10)

10
1
MAINTENANCE
STEP 1. Regularly inspect the residue manager for loose or worn bolts. Repair and replace
as needed.
STEP 2. If you choose to leave the seal, then you need to fill cavity with grease. If you
choose to remove the seal, then you need to fill cavity and maintain the grease every 50
hours of use.
IMPORTANT: For proper operation, the planter frame must operate level (for, aft
and side to side) and at the correct height, typically 20”-22”.
PARTS IDENTIFICATION