Installation instructions – Yetter 2967-047 TITAN Residue Manager for John Deere HD Coulter User Manual
Page 8
Advertising
8
INSTALLATION INSTRUCTIONS
STEP 4.
Attach the residue manager arm/wheel assembly using the 5/8” x 2” bolt,
bushing and 5/8” x 3” bolt, washer, bushing and locknuts. Do not fully tighten.
STEP 5.
Tighten the hardware using the sequence illustrated. Start with #1 and end at
#6. Before tightening #6 check the clearance on each side of the coulter blade, you may
need to move the 2967-614 bracket in or out on the slotted hole.
Advertising