Yetter 2967-081 Residue Manager for JD Screw Adjust - Manual (Page 2)

2
INSTALLATION
1.
When assembling spoke wheel, bearing assembly and hub cap, be sure to
align the grease fitting hole with the hole in the spoke wheel with groove in
hub cap to assure proper greasing of wheel and hub assembly.
2.
Be sure to install the 3/4” spacers and bearing shields when assembling
the spoke wheel and bearing assembly. Using the 5/8” lockwasher and
nut, secure the wheel to the bracket. Torque 150 ft.lbs.
3.
Attach the spoke wheel assembly to the screw adjust bracket using the
two 1/2” x 3 1/2” bolts and lock nuts. Stagger spoke wheels so that half of
the rows have the left wheel leading and half of the rows have the right
wheel leading.
4.
Fill hub and bearing assembly with general-purpose grease.
MAINTENANCE
After a few hours use, check all bolts to make sure they are tight.