Yetter 2984 Maverick Opener - Manual (Page 7)

7
SEALING WHEELS ASSEMBLY
See Parts Identification on Page 9.
1. Insert the inner pivot bushing (19) into the pivot collar of the knife plate (20).
2. Hook the pushrod (16) onto the peg of the knife plate.
3. Attach the wheel sealer arm (8) to the knife plate to the pivot collar using the 1/2” x 4-1/2” bolt (7) and
hex lock nut (10).
4. Slide the spring bracket (15), spring (14) and spring bushing (13) onto the pushrod and secure with the
3/4” hex lock nut (12).
5. Now attach the 4-1/2 x 16 wheel (3) to the adjustment stem (1) with the 5/8” x 4” bolt (4), spacer (3),
lockwasher (29) and hex nut (30). Repeat for second wheel
6. Install the stem and wheel assembly into the socket of the sealer wheel arm, align the holes and insert
the adjustment pin (5) and secure with the hairpin cotter (6). NOTE: The narrowest gap between the
wheels should be forward and the widest spacing to the rear.