Assembly – Yetter 3500 Series Toolbar Rotary Hoe User Manual
Page 12
Advertising
12
ASSEMBLY
SCREEN ASSEMBLY
1. Assemble the screen brackets to the screen with four 3/8 x 1” bolts, lock washers,
and nuts.
2. Mount the screen assembly to the main frame as shown with two u-bolts, lock
washers, and nuts. Additional screens can be ordered if desired.
CAUTION: DO NOT OPERATE ROTARY HOE UNLESS SCREEN IS
SECURED AND PROPERLY INSTALLED.
SMV ASSEMBLY
1. Mount SMV emblem as shown with point of triangle up as near operators left of
center as possible. Face so emblem is visible from rear of equipment.
Advertising
This manual is related to the following products: