Yetter 6000-012 Tuffwear Scraper - Manual (Page 3)

3
ASSEMBLY INSTRUCTIONS
3. Assemble the right and left scraper arms with the spring hooked into the arm slots.
4. Place the tabs of one arm into the mounting holes and pull the assembly under the planter opener frame to
the other side and insert the tabs into the mounting holes. Note: check to make sure the tabs are securely
inserted in the scraper mounting holes.
5. Hold the arms out away from the blade and slide the scrapers onto the arms.
6. Insert scraper arm bent end into the oblong slot in scraper and secure with 2570-159 hairpin cotter.
7. Release scraper arm, spring tension will hold the scraper against the planter disc blade.
Note: check that the carbide edge is parallel with the disc and that there is spring tension holding the