Yetter 5000-028 Stalk Devastator - Manual (Page 24)

24
ASSEMBLY INSTRUCTIONS
STEP 5. INSTALL THE PUSH RODS INTO THE MOUNT BRACKETS THEN ATTACH
TO THE PIVOT ARMS WITH THE 5/8” SHOULDER BOLTS, WASHERS AND ½” JAM
LOCK HEX NUTS.
NOTE: THE WASHERS ARE INSTALLED ON EACH SIDE OF THE “EYE” OF THE
PUSH ROD.
NOW INSTALL THE COMPRESSION SPRINGS, SPRING BUSHINGS AND ¾’ LOCK
HEX NUTS.