Yetter 5000 Series Stalk Devastator- CNH, John Deere, Drago & Geringhoff - Manual (Page 6)

6
TABLE OF CONTENTS
INTRODUCTION…………………………………………………………….…..2
WARRANTY………………………………………………………………….….2
SAFETY INFORMATION…………………………………………………….2-5
TABLE OF CONTENTS…………………………………………………….….6
TORQUE………………………………………………………………………....7
INSTALLATION / PARTS IDENTIFICATON
5000-001 (JD 693/606C)……………………………………………….8-10
5000-002 (JD 893)………………………………………………...11, 13-14
5000-003 (JD 608C)…………………………………………………...12-14
5000-004 (JD 612C)…………………………………………………...15-17
5000-005 (CNH 3206/3406)…………………………………………..18-20
5000-006 (CNH 3208/3408)…………………………………………..21-23
5000-007 (DRAGO 630)………………………………………………24-26
5000-008 (JD 1293)……………………………………………………27-29
5000-009 (CNH 2206)………………………………………………....30-32
5000-010 (CNH 2208)………………………………………………....33-35
5000-011 (JD 608C 2012-PRESENT)……………………………….36-38
5000-013 (CNH 1063)………………………………………………….39-41
5000-014 (CNH 1083)………………………………………………….42-44
5000-015 (GERINGHOFF 8-ROW)…………………………………..45-47
5000-016 (GERINGHOFF 12-ROW)………………………………....48-50
5000-017 (DRAGO 830)……………………………………………….51-53
5000-018 (DRAGO 1230)……………………………………………..54-56
5000-019 (CNH 2412-3412)…………………………………………..57-59
5000-021 (GERNINGHOFF 6-ROW)………………………………...60-62
OPERATION
LOCK UP PIN………………………………………………………………63
THE SIDE OF THE BEARING
ASSEMBLY WHERE THE
BEARING IS PROTRUDING
MUST BE INSTALLED
TOWARD THE ROLLER!