Yetter 6200-051 Interchanger User Manual
Page 3
Advertising
3
ASSEMBLY
6200-051 INTERCHANGER ™
FOR JOHN DEERE 1700 SERIES V-CLOSING WHEELS
4. Attach the 6200-427 Interchanger ™ Block to the V-closing wheel arm (notch facing up)
using ½” flange head bolt and ½” hex nut.
5. Assemble the Interchanger ™ closing wheel using the 5/8” x 4” cap screw, ¼” spacer, 5/8”
jam nut, 5/8” lock washer.
6. Attach the Interchanger ™ closing wheel to the v-closing wheel arm in the 5/8” threaded
hole of the Interchanger ™ block, start the 5/8” lap screw threading by hand 1 full turn
before using an impact or socket wrench.
Advertising
This manual is related to the following products: