Install the new lamp unit, Tighten the screws of the new lamp unit, Attach the lamp cover – Anthem LTX 300 User Manual
Page 47
ENGLISH
47
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
Install the new lamp unit
CAUTION
●
Use only genuine replacement parts
for the lamp unit. Also, never attempt
to reuse an old lamp unit. This may
cause a malfunction.
●
Do not touch the surface of a new lamp.
This may shorten the lamp life and
cause lamp blowout.
Tighten the screws of the new
lamp unit
●
Tighten the screws with a screwdriver.
●
Do not place the removed lamp unit at
locations that is reachable by children
or near combustible items.
●
Dispose used lamp units in the same
way as fl uorescent lamps. Follow your
local community rules for disposal.
Attach the lamp cover
●
Insert the top part (with 2 claws) of the lamp cover into
the unit.
●
Fasten the screws with a screwdriver.
MEMO
4
5
6
Handle
After Replacing the Lamp