ATEN CN-5000 - Manual (Page 105)

Sun Systems
Problem Resolution
Video display problems with
HDB15 interface systems
(e.g., Sun Blade 1000
servers).
1
The display resolution should be set to 1024 x 768:
Under Text Mode:
1. Go to OK mode and issue the following
commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
Video display problems with
13W3 interface systems
(e.g., Sun Ultra servers).
1
The display resolution should be set to 1024 x 768:
Under Text Mode:
1. Go to OK mode and issue the following
commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
ffbconfig -res 1024x768x60
2. Log out
3. Log in
1. These solutions work for most common Sun VGA cards. If using them
fails to resolve the problem, consult the Sun VGA card’s manual.
2005-09-13
Appendix
93