C-TECH-I Imperiale LI-VLK-11 - Manual (Page 2)

C-TECH-I, INC
USERS' GUIDE
Installation
See the illustration above
1. Position the faucet body at the hole of the wall, and sign the screws mounting
position.
2. Drill holes at the signed place. Fix the expansion bolts in the wall.
3. Put the flange on the wall, fix the screws into the expansion bolts through the
flange. Tighten the screws.
4. Cover the decorative panel
5. Put the inlet of the faucet into the hole through the panel and flange, insert to
the wall.
6. Connect the inlet hoses to the water supplies. Before connecting the inlet hose
to the indoor water supply pipe, you should pay attention to the three points as
follow:
1) Flush the pipe;
2) There are no stings at the ends of the water supply pipe;
3) Using other seal materials at the ends of the inlet pipe is not allowed
2/4