DAVIS Health EnviroMonitor: Console - Manual (Page 32)

Using the Health EM
Page 40 Health EnviroMonitor Manual
3. Press TIME to exit.
The Health EM saves the AutoClear time. At the set time each day, the
Health EM clears those functions for which AutoClear is enabled (See
“Enabling/Disabling AutoClear” on page 46).
H IGHS AND L OWS
The Health EM stores highs/lows for many of its functions. The table con-
tained in “Highs and Lows” starting on page 13 lists all of the highs and lows
stored/displayed by the Health EM. The procedure for displaying and clearing
highs and lows is the same for each high/low. The general procedure is cov-
ered below.
S AMPLE H IGH /L OW D ISPLAYS
When viewing high wind speed, the direction of the high gust appears as a
steady (not flashing) diamond at one of the points.
Displaying Highs and Lows
1. Press the appropriate key as necessary to display the desired weather condition.
2. To view the high/low, press Recall.
The high/low reading appears on the right of the display. (If a function
stores/displays both a high and a low, the high reading appears first.)