DAVIS Alarm Output Module - Manual (Page 2)

Page 2 Alarm Output Module
C OMPONENTS
The AOM includes the following components. Please make sure you have all
listed components before continuing.
✦ Alarm Output Module
✦ Alarm Output Module Cable, 2-foot (0.6 m)
✦ Power Y-Cable
✦ AC-Power Adapter
✦ Two Cable Ties
✦ Three #6 x 1” (25 mm long) Self-Threading Screws
✦ Four Adhesive Pads
T OOL AND M ATERIALS N EEDED
You will need some of the following tools and materials.
✦ Relays
You may need to obtain your own relays in order to switch equipment at
voltages higher than 28 volts or power levels above 10 Watts or to pro-
vide time delays or other logic functions. Application notes discussing
this further are available from Davis Instruments.
✦ Medium Phillips Screwdriver
✦ Small Slotted Screwdriver