DAVIS GroWeatherLink Software - Manual (Page 77)

U S I N G T H E S O F T W A R E
Using the Strip Charts
70
▲ Save
To save the current strip chart as a template, choose Save from the File menu.
Enter the desired file name and choose OK to save the template.
S AVE S TRIP C HART T EMPLATE
▲ Make Default
To make the current strip chart the default strip chart (which appears initially
whenever you open the strip chart window), choose Make Default from the
File menu.
▲ Print
To print the strip chart window, choose Print from the File menu. Set your
printer options in the Print dialog box (for best results, be sure to choose land-
scape mode) and then choose OK.
▲ Close
To close the strip chart window, choose Close from the File menu.
Add/Remove Menu
To add a variable to any of the strip charts, select the desired strip
chart (to make it active) and then select the variable you want to
add from the Add/Remove menu. To remove a variable from any of
the strip charts, select the desired strip chart (to make it active) and
then select the variable you want to remove from the Add/Remove
menu.
Note: Variables which are plotted on the active strip chart have check marks next to
their name.