Attaching the rain collector ii to the shelf – DAVIS Rain Collector Shelf: GroWeather, EnviroMonitor, Weather Monitor & Wizard User Manual
Page 6
Page 6
Rain Collector Shelf Manual
A
TTACHING
THE
R
AIN
C
OLLECTOR
II
TO
THE
S
HELF
1. Remove the Rain Collector II’s cone from the base.
Consult your Rain Collector II manual for instructions.
2. If necessary, detach the Rain Collector II from its current mounting surface by remov-
ing the screws from the base.
Consult your Rain Collector II manual for instructions.
3. Position the Rain Collector II base on the shelf so the holes on the base line up with
the holes in the shelf.
The four large holes in the shelf are for water runoff.
4. Insert one #8-32 x 3/4" screw into each of the holes.
5. Attach the Rain Collector II base to the shelf using a #8 flat washer, a #8 split lock
washer, and a #8-32 hex nut on each of the screws.
Tighten until the base is securely fastened to the shelf.
A
TTACHING
THE
R
AIN
C
OLLECTOR
II
TO
THE
S
HELF
6. Replace the Rain Collector II’s cone.
Consult your Rain Collector II manual for instructions.