DAVIS Rain Collector Heater - Manual (Page 2)

Components
2
The Installation Hardware Kit includes:
• Three Cable Ties
• Two #6-32 x 3/4” Screws
• Two #6-32 Hex Nuts
• Two #6-32 Split Lock Washers
• Two #4 x 3/8'' Self-tapping Screws
Components
Tools and Materials Needed for Installation
In addition to the components listed above, you will need some of the
following tools and materials. Please be sure you have everything you need
before beginning the installation.
• Medium Phillips-head and Slot-tip Screwdrivers
• Drill with 5/32” (4
mm) or 3/16” (4.8 mm), and 9/32” (7.2 mm) or 5/
16” (8 mm) Drill Bits
• Wire Cutter
• Wire Stripper or Knife
• Cable Clips or Weather-Resistant Cable Ties
Heater Assembly
Insulation Blanket
Heater Cable
50' (15 meter)
Cable Ties (3)
Wall Transformer
with Heater Power Unit
#6-32 x 3/4"
Screws (2)
with Lock Washers
and Hex Nuts
#4 x 3/8"
Self-tapping
Screws (2)