DAVIS Shelter Heaters - Manual (Page 5)

Installing the Insulation Blankets and Heater Page 5
I NSTALLING THE I NSULATION B LANKETS AND H EATER
Follow the instructions below to install the insulation blankets and the heater
in the appropriate shelter.
Installing in the Complete System Shelter
1. Remove the panel from the back of the CSS.
Consult your CSS manual for instructions.
2. Crease and fold the CSS insulation blankets as shown below.
Make sure the adhesive strips on the blanket are on the back of the blanket
(the side not shown below).
C REASE AND F OLD CSS I NSULATION B LANKETS
3. Try inserting the blankets into the CSS to make sure they fit. Adjust the folding
as necessary to make them fit.
4. Once you are sure the blankets will fit, remove the backing from the adhesive
strips on the insulation blankets and secure the blankets in the CSS.
Make sure the blankets do not cover the four screw holes in the corner of the
CSS.
I NSTALLING B LANKET INTO CSS