Alpine CRA-1667RF - Manual (Page 12)

10
-EN
MP3 Changer Operation (Optional)
Playing MP3 Files
If you connect a changer applicable to MP3, you can
play CD-ROMs, CD-Rs, and CD-RWs containing MP3
files on this unit.
1
Press the SOURCE button of the Remote Display or
the Remote Control to switch to the MP3 Changer
mode.
The mode will change every time the button is pressed.
2
Press the
4 or 3 button of the Remote Display, or
press the 8 or 9 button of the Remote Control until
your desired disc number appears in the display.
To pause playback, press the -/J button on the
Remote Control.
Pressing the -/J button again will resume playback.
NOTES
• The unit can play discs containing both audio data and MP3
data.
• The MP3 indicator is lit during MP3 playback.
Music Sensor (Skip)
1
Turn the rotary encoder to the left, or press the g
button of the Remote Control once during CD play to
return to the beginning of the current file. If you wish to
access the beginning of a track further back,
repeatedly press until you reach the desired file.
Turn the rotary encoder to the right, or press the f
button of the Remote Control once to advance to the
beginning of the next file. If you wish to access the
beginning of a track further ahead, press repeatedly
until the desired file is reached.
NOTES
• The music sensor feature is functional in the play or pause
mode.
• Files are played back in their pathname order which was used
when they were written to the CD.
Fast Forward and Backward
1
Press the ( or ) button of the Remote Display, or
press and hold the g or f button of the Remote
Control to quickly move backward or forward until you
reach the desired section of the file.
Note
There is no audio output during fast forward/backward for MP3
files.
Selecting Folders
1
Press the FOLDER 4 or FOLDER 3 button on the
Remote Control to select the folder.
File Search
You can locate all the files on a disc and play them.
1
Press the rotary encoder for at least 2 seconds, or
press the -/J button of the Remote Control for at least
2 seconds during playback.
The unit switches to File Search Mode.
2
Turn the rotary encoder, or press the g or f
button of the Remote Control to select the desired file.
Then, if you press the rotary encoder, or press the
-/J button of the Remote Control, the selected file
starts to play.
NOTE
File Search Mode is automatically canceled if no buttons are
pressed within 5 seconds.
Rotary encoder
(
)
g f
SETUP
REPEAT
8
9
SOURCE
SOURCE
3 4
M.I.X.
SCAN
-/J
SETUP
FOLDER 4 FOLDER 3