DAVIS Weather Envoy (6314, 6314C) - Manual (Page 7)

H A R D W A R E I N S T A L L A T I O N
Preparing the Envoy
3
P r e pa r in g t h e E n v o y
Perform the following procedures to prepare your Envoy for operation.
▲ Install the Data Logger
▲ Install the Batteries
▲ Mount your Envoy
▲ Make the Envoy Connections
▲ Test using WeatherLink
▲ Setup the Envoy using WeatherLink
Installing the Data Logger
CAUTION: The WeatherLink data logger must be installed before you install the
batteries!
1. Remove the three screws from the back of the
Envoy case.
2. Separate the case halves to expose
the data logger connector.