DAVIS WeatherLink for Alarm Output Add. User Manual
Weatherlink, For alarm output, Introduction
Advertising
Table of contents
Document Outline
- WeatherLink® for Alarm Output
- Introduction
- Hardware Installation and Requirements
- Software Installation and Setup
- Installing the Software
- Running the Configuration Software
- Finding the Correct Serial Port
- Logger Type
- Time Out Period
- Station Configuration
- Units
- Output Test.
- Alarm Logging
- Advanced
- Delay on Release
- Delay on Reactivation
- Pulse Width
- Alarm Activation
- Circuit Behavior
- Default
- Output
- 1. A user wants to activate a fan to bring in cooler outside air to passively cool their house. This affect only works if the temperature outside is 5°F lower than the inside temperatures. Additionally, you don't want to cool your house if the insid...
- 2. A user wants to activate the sprinkler system when the Daily ET exceeds the Daily Rainfall by 0.05": “IF Daily ET Minus Daily Rain IS Greater Than or = 0.05; DONE”.
- 3. A user wants to activate environmental controls whenever the temperature outside differs from the inside temperature by 20°F or more. Whether it is hotter or colder outside does not matter, but if the inside temperature is between 68°F and 72°F...
- Clear
- Contact Specifications