DAVIS Vantage Pro2 Quick Reference Guide User Manual
Page 12
HUM
CHILL
Press 2
ND
&
CHILL to display:
•
Wind Chill (°F, °C)
Press 2
ND
&
UNITS to change unit of measure.
All temperature-related readings (inside and outside temperature, wind
chill, heat index, and dew point) will read in the same unit of measure.
Changing one from °F to °C (or vice versa) changes all others.
On the ticker tape:
WIND CHILL WARNING . . . will appear on the ticker tape when you are
displaying wind chill if the reading is <0°F (−18°C) and the 10-minute av-
erage wind speed is >=10 mph (16 km/h).
Press HUM to toggle between:
•
Outside Humidity (%)
•
Inside Humidity (%)
•
Hum 2–8 (%) if you have a Temperature/Humidity Station.
•
Leaf Wetness & Outside Temperature (0°F, 0.0°F, 0°C, 0.0°C ) if you
have a Leaf Wetness Station. Continue to press
HUM to display
each leaf wetness/temperature pair. Maximum is two pairs.
12
1
2