DAVIS Extra Solar Panel Kit (6616) - Manual (Page 3)

2
Tools for Setup
• Adjustable wrench or 7/16 '' wrench
• Drill and 3/16 '' (5 mm) drill bit (if mounting on a vertical surface)
• Phillips head screwdriver
Using the Extra Solar Panel Kit with a Solar
Power Kit or Vantage Connect
In low light conditions, you may use an Extra Solar Panel Kit to provide additional
solar charging to your Vantage Connect battery or Solar Power Kit battery.
1. Mount the Solar Panel Kit or Vantage Connect and the Extra Solar Panel Kit
shelters near each other. (The connecting Y-cable is 4' [1.2 m] long.)
2. Remove the plug from one of the holes in the bottom of the Solar Power Kit or
Vantage Connect shelter.
Note: For clarity, the solar power cable is shown in front of the
battery. In use, the cable will run behind the battery. The cable running
Extra Solar Panel Kit with
Heavy Duty Solar Power Kit
Extra Solar Panel Kit with
Vantage Connect
between the two shelters will also be secured to the pole.