Monoprice 6518 Recessed Wall Mount Bracket - Manual (Page 6)

6 of 8
Attaching AA to Screen with VESA ® Mounting Pattern
C
Mounting Patterns
VESA ® 200 x 100
VESA ® 200 x 200
VESA ® 100 x 100
VESA ® 200 x 100
VESA ® 200 x 200
VESA ® 100 x 100
Choose hole pattern as shown in detail 3 for VESA mounting pattern. Begin with the shortest length screw, hand thread
through adapter plate into screen as shown in detail 4. Screw must make at least three full turns into the mounting hole
and fit snug into place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer length
screw from the fastener pack. Repeat for remaining mounting holes. Securely tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
DETAIL 3 DETAIL 4
ADAPTER
PLATE
SCREEN
Make sure in-wall box(BB) and mount (AA) is level.
NOTE
fig.B.1
AA