Axis Communications AXIS T8312 - Manual (Page 3)

AXIS T8310/T8311/T8312/T8313 User’s Guide Page 3
ENGL
IS
H
AXIS T8310, AXIS T8311
AXIS T8312 & AXIS T8313
User’s Guide
This User’s Guide provides instructions for installing AXIS T8310 Video Surveillance Control Board.
For all other aspects of using the product, please see the AXIS Camera Station help pages.
AXIS T8310 Video Surveillance Control Board consists of three units that can be installed separately
or together as one unit. AXIS T8311 gives responsive and accurate control of the pan, tilt and zoom
functionality of the camera(s) on the network. AXIS T8312 is used to navigate quickly between
workspaces, cameras, views and PTZ presets. AXIS T8313 is used to jog and shuttle through
recorded video. All the units are powered through the USB connection.
Installation Steps
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 6
Package Contents
Item Models/variants/notes
Joystick/Keypad/Jog Dial AXIS T8311/AXIS T8312/AXIS T8313
USB cable AXIS T8311: 1 x 200 cm (78.7”) when sold as a separate item,
connects to PC only
AXIS T8312: 1 x 40 cm (15.7”) for connection between units
1 x 200 cm for connection to PC
AXIS T8313: 1 x 40 cm (15.7”)
1 x 80 cm (31.5”)
for connection of two units on either side of keypad
Printed materials AXIS T8310/T8311/T8312/T8313 User’s Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.