Monoprice 9206 Pan/Tilt/Zoom IP Camera - Manual (Page 46)

Pan/Tilt IP Camera
4.2. Specifications
Models Pan/Tilt
Power DC 5V, 2A
Processors RISC CPU, hardware video processing and compression.
Network interface Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Wireless interface IEEE 802.11g 6 - 54 Mbps
IEEE 802.11b 1 - 11 Mbps
Transmit power: 14.5dBm typically @ 802.11g
17.5dBm typically @ 802.11b
Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER
11Mbps: Typical -86dBm @ 10% PER
Modes: Infrastructure and ad-hoc
Antenna gain: 1.8 dBi
Image sensor RGB VGA 1/4 inch CMOS
Automatic exposure control, automatic white balance,
automatic gain control, automatic brightness control.
Light sensitivity 0.2 Lux
Lens 3.2 mm, F2.0, viewing angle: 61°, fixed iris, focus range: 40
cm to infinity
D/I D/O interface 1 D/I for alarm detection
1 D/O for alarm triggering
Micro-SD card
interface
Micro-SD card interface for local video storage
The supported Micro SD-Card capacity is up to 16G bytes.
Buttons One reset button, to factory default settings
Indicators One LED for internet connection status indication
One LED for Ethernet connection indication
Video compression MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection,
profiles: Simple Profile, level 0-3
Resolutions 160x120, 320x240, 640x480
Frame rate Up to 30 fps in all resolutions
Video streaming MPEG-4
Separate frame rate/resolution/bandwidth settings for PC
and mobile.
Image settings Resolution: VGA(640x480), QVGA(320x240),
QQVGA(160x120)
46