Monoprice 8816 2DNR - Manual (Page 17)

WHITE BAL.
> AUTO: Select the AUTO mode for automatic adjustment of the shutters.
It will slow down or speed up depending on the environment.
> FLK: Select the FLK mode if the screen flickers due to differences in light
and electric frequencies.
BRIGHTNESS: 0~255
The BRIGHTNESS can be adjusted by opening and closing of the Iris aperture.
User may fine-tune the screen to their preferred brightness. The brightness
ranges from 0~255.(0 being the darkest and 255 being the brightest possible)
AGC (Automatic Gain Control) : OFF, LOW, MIDDLE, HIGH
This function is used to amplify the video signal when it falls below the set
parameter. As the AGC level increase, the overall screen gets brighter but the
level of noise is increased.
Note: The AGC feature cannot be modified while Day&Night mode is set to
AUTO. By factory default, AGC is automatically set on “MIDDLE”.
RETURN: RET, END
Selects “RET” to go back to the main menu. Select “END” to save and exit.
DWDR (Digital Wide Dynamic Range): ON, OFF
Wide Dynamic Range works to correct excessive light within the frame to
produce a usable image.
It works by calculating the ratio between the brightest and darkest values of
the picture and determines the balanced medium.
This function is used to control the while balance under different lighting
conditions. Adjusting this setting calibrate the camera for correct color rendering.
The factory default of ‘ATW1’ is recommended for optimal performance.
17