Dee Zee DZ17030C - Manual (Page 7)

Push up on the brace to put tension on the threaded plate in the large slot. Tighten the bolt
with the threaded plate using a 13mm socket. Air tools are recommended for this.
After the bolt with the threaded plate is tightened, tighten the remaining 8mm bolts.
Repeat this step for the other brace locations.
5
Place the tube on the cradle portion of the brace, aligning the threaded insert in the tube with
the slots in the braces.
6
DZ 17030 5 of 6 1/31/12