Dee Zee DZ16221 - Manual (Page 4)

WRENCH/RATCHET
13mm
TAPE
MEASURE
Find the front mounting location as shown below. The driver's side is shown.
TOOLS REQUIRED
1
Insert the small threaded plate [B] and center it in the opening of the square mounting hole.
NOTE: THE BOLT WILL NOT
ACTUALLY BE IN THE PLATE WHEN
IT IS INSTALLED. IT IS SHOWN
HERE TO HELP MAKE CLEAR WHERE
THE THREADED PLATE WILL GO.
DZ 16221 2 OF 9 2/6/2013