Dee Zee DZ16222 - Manual (Page 13)

Slide the board to the desired location from front to rear. A tape measure may be used to insure
the board is centered between the wheel wells. Slide to board in/out on the brace slots to place
the board an even distance from the vehicle.
Attach the board to the braces using the flange nut [J]. Tighten all board bolts with a 13mm socket.
Check to make sure all bolts are tightened.
Repeat process for passenger side.
15
DZ 16220 DZ 16222 11 OF 11 8/13/2013