Dee Zee DZ16260 - Manual (Page 7)

For the front brace:
The plug directly in front of the metal bracket will be used. If your vehicle does not have a metal
bracket at this location, then it will be directly in front of the clip hole removed from Step 2.
Thread the short 8mm bolt [I] through the front slot in the brace [F] into the large threaded plate [B].
Thread the long 8mm bolt [H] through one of the back slots in the brace into the small threaded
plate [C].
If the rubber plugs match the first picture in Step 4, you will need to use the other slot
in the back of the brace.
5
INSTALL PLATE WITH
FLANGE TOWARD
DZ 16260 5 OF 13 1/30/2014