Dee Zee DZ1040 - Manual (Page 4)

WRENCH/RATCHET
3/8", 7/16"
TAPE
MEASURE
TIN SNIPS
3/16" DRILL BIT
1/4" DRILL BIT
Place the rubber trim onto the back lip of the running board. Cut the trim to length using tin snips.
TOOLS REQUIRED
1
Attach the mud flap [C] to the end of the running board using
the 1/4" x 3/4" hex head bolt [G], the 1/4" flat washer [H], and the 1/4" hex nut [I].
2
DZ 1040 2 OF 9 7/28/2011