Dee Zee DZ2044 User Manual

Page 12

Advertising
background image

Pressing the flap up against the wheel well, drill two 3/16" holes through the hole in the mud flap
into the sheet metal of the wheel well. Repeat for the rear of the board.

Attach the mud flap to the wheel well using two sheet metal screws [K] with a 3/8" socket.
Repeat for the rear of the board.

17

18

Check all hardware to make sure it has been tightened.
Repeat the assembly steps for the other side of the vehicle.

DZ 2044

10 OF 10

8/14/2012

Advertising