Dee Zee DZ2045 - Manual (Page 9)

Drill 1/4" holes up through the board using the holes shown below.
Repeat this step for each bracket location.
Attach the running board to the angle brace using the 1/4" x 1" ribneck carriage bolt [F],
9
10
Attach the running board to the angle brace using the 1/4" x 1" ribneck carriage bolt [F],
1/4" flat washer [H], and 1/4" hex nut [I]. Tighten using a 7/16" wrench or deep well socket.
10
DZ 2045 7 OF 8 10/13/2011