Dee Zee DZ17940 - Manual (Page 6)

½
4 Place the mudflap between the fender well and the wheel well liner. Insert the top two
screw and washer from Step #1 into the holes. Insert in the bottom hole a 1/4” X 1”
Phillips Head Screw (B) and 1/4” Fender Washer (C) then place a 1/4” Flat Washer (E)
and 1/4” Nut on the 1/4” X 1” Phillips Head Screw (B).
Re-use the screws and
washer removed in step
#1
B C D E
Note: Use large washer on
this side of mudflap
Mudflap placed between
the Wheel Well Liner and
the Fender Well.
See Step #1 and #2 from Option #1 for Step #1 and #2 of Option #2.
The Wheel Well Liner
does not need to be
cut in Option #2
Option # 2
The Wheel Well Liner does not need to be cut in option #2. The Mudflap slides in
between the Wheel Well Liner and the Fender.
3