Dee Zee DB-1500 - Manual (Page 3)

Cab Protector Instruction 02/09/2000 PAGE 2
STEP 3
1. Using the drawing below as a guide, place a U-bolt , Steel Plate, and Rubber pad over the end of the cab
protector leg.
2. Secure the U-bolt, Steel Plate, and Rubber pad into place using a Steel plate, Rubber pad, and 5/8" flat washer
and hex nut as shown below.
3. Repeat this process for the other end of the cab protector leg. Tighten the 5/8" nut until snug and then cut off
the excess U-bolt length with a hacksaw.
**If you should incur any problems with the installation of this product, please feel free to call us at 1-800-779-8222.
So that we may better serve you when you call, please have the W/O#, SEQUENCE#, and the DATE
from the labels on the outside of the box.
Vehicle Cab
U-bolt
Vehicle Frame
Rubber Pad
Cab Protector Leg
Rubber Pad
5/8“ Flat Washer and Hex Nut
Steel Plate
Steel Plate