Dee Zee DZ951601 - Manual (Page 16)

To see a video showing the rack being put up, please use the QR code below.
* Review & assure understanding of all load, handling, operating limitations and
safety messages contained in your Vehicle Owners Manual. Maximum Invis-a-rack
load is 500 lbs. (evenly distributed & secured).
WARNING
load is 500 lbs. (evenly distributed & secured).
* Ensure all fasteners & supports used to erect Invis-a-rack front & rear frames are fully
engaged & secured. Inspect frequently and do not use Invis-a-rack if damaged or
subjected to unintended overload.
* Required set-up and stowage if Invis-a-rack involves pinch points where braces and
cross pieces attach. Keep fingers clear and do not attempt to set-up or stow with
load on Invis-a-rack.
* CAUTION! Hold down clamps must remain secured to support Invis-a-rack and load.
Check often (particularly if rough road) and retighten as necessary. To avoid loss
or damage to load & risks to others: NEVER USE HOLD DOWN CLAMPS AS
ATTACHMENT FOR STRAPS OR OTHER MEANS OF SECURING LOAD. ALWAYS
SECURE LOADS DOWN TO FACTORY (OEM) TIE DOWNS.
Invis-A-Rack 15 of 15 3/6/2013