Dee Zee DZ6534JWB - Manual (Page 5)

On the passenger side tie-down location, stack two of the spacers [D] over the tie-down bolt hole.
Attach the brace [B] using the 6mm x 40mm bolt [C], and washer [F]. Place the bolt through the
hole in the brace, through the holes in the spacers, and thread into the hole where the tie-down
bolt was removed. The vertical flange on the brace should be towards the center of the vehicle.
Do NOT completely tighten at this time.
3
DZ 15 4 of 6 6/15/2012