Night Owl CS-Key-4GB - Manual (Page 11)

10
1. To turn on the keychain, press and hold the On/Off button
for 2 seconds, the red LED indicator will come on and turn
green to indicate the keychain is on and ready for use.
2. Press the Start/Stop button once. The LED indicator will
turn red to indicate the keychain is recording.
3. To stop recording, press the Start/Stop button once again.
The LED indicator turns to green when recording stops.
Prior to recording any videos, make
sure that the memory card is properly
inserted into the keychain.
Your keychain will automatically shut down if not used
for 30 seconds. The red LED indicator will flash six
times then the keychain will automatically shut down
when memory card is full.
Chapter 7: Recording a Video