Night Owl CS-Watch-4GB - Manual (Page 10)

9
5.
Go to “File”, “Save” the document and safely remove the
video watch from your computer.
6. Turn on the video watch, press and hold the Start/Stop
button for two seconds, to initiate the reset.
Changing the Time on the Face of the Video Watch
1.
Locate the “Time Adjust Knob” in the middle of the right
side of the video watch.
2. Gently pull the knob out. The hands on the video
watch’s
face will stop moving.
3. Turn the knob to adjust the time.
4. Push the knob back in and the hands on the video
watch’s
face will begin to move.
When your
video watch’s battery is too low, the time may
reset to factory default. You will need to reset the time
again if you want your recorded files to have the correct
recording time.