Outback Power Systems PSX-240-Relay Installation Manual - Manual (Page 3)

Outback Power PSX-240-Relay User’s Guide
PSX-240-Relay User’s Guide Page 14
P/N: 900-0053-1
Rev. A – Released 12/19/2005
Outback Power PSX-240-Relay User’s Guide
PSX-240-Relay User’s Guide Page 3
P/N: 900-0053-1
Rev. A – Released 12/19/2005
• For equipment grounding hook up, see the WIRING
CONNECTIONS AND TORQUE SPECS section in this
manual. This product is intended to be installed as part of a
permanently grounded electrical system per the NEC.
• The equipment ground on the PSX-240-Relay is marked with
this symbol:
GENERAL PRECAUTIONS
•
The PSX-240-Relay is approved for indoor mounting only in the
positions described in the MECHANICAL INSTALLATION
section of this manual.
• Do not disassemble the PSX-240-Relay beyond the instructions
included in this manual. Refer servicing to a qualified service
center when service or repair is required. Incorrect re-assembly
may result in a risk of electric shock or fire.
•
To reduce risk of electric shock, disconnect all wiring before
attempting any maintenance or cleaning.