Outback Power Systems GVFX Series Inverter/Charger Programing Manual - Manual (Page 51)

49
AuXILIAry (AuX) FuNCTIONS
The AUX output provides a 12 VDC, 0.7 ADC max output at the AUX terminals to control DC loads, or
AC external loads, if a DC-controlled relay is used. Typical loads include sending a fault alarm signal or
running a small fan to cool the FX.
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
• Press the <ADV> soft key.
Note: Pressing and holding the first two soft keys at the
same time will always bring up the Main Menu screen.
• Push any soft key on the ADV/SETTINGS/WARNING
screen and go to the ADV/PASSWORD screen.